ProtoStackv0.1

Interactive Protocol Visualizer

Back to all protocols
RIPVRRP
Network & CoreProfessional trackAdvancedOSI: Network LayerStandard: ISO/IEC 10589

IS-IS

— Intermediate System to Intermediate System

IS-IS is a link-state interior gateway protocol originally built for the OSI CLNS stack and later extended to carry IPv4 and IPv6 reachability. Routers flood Link State PDUs until every node holds an identical database, then run Dijkstra SPF to compute shortest paths inside a Level 1 area or across the Level 2 backbone.

Read first: Ethernet (802.3)Content reviewed 2026-11-18

Interactive Session: How IS-IS Works

Step through the packet exchange sequence between nodes.

Interactive Execution Sandbox

Interact with a live or clearly-labelled simulated instance of IS-IS.

Threat Model & Attack Simulation

How this protocol is attacked in practice, what defenders can see, and which control stops it.

Threat model & attack simulation

Simulated

Defensive education. Every step runs in this page; no traffic is generated or sent.

Attack library

IS-IS LSP injection

Spoofing

A rogue router forms an adjacency and floods link-state PDUs that distort the topology.

Attackersimulated
IS-IStarget
Attack step 1 of 3
Form an adjacency

The attacker matches the area and authentication parameters.

What a defender can see

New IS-IS neighbour on an edge port.

Impact if unmitigated

Routing instability or interception across the domain.

Defences that matter
  • IS-IS authentication (MD5 or HMAC-SHA)
  • Passive interfaces and prefix filters
  • Topology change monitoring

This is a conceptual model for defenders, not an exploit toolkit. It contains no payloads, tooling or instructions for attacking systems you do not own.

Protocol Specification & Architecture

Key characteristics, real-world deployment patterns, and trade-offs.

Core Technical Features

  • Runs directly over Layer 2, so it needs no IP address or transport port of its own
  • Two-level hierarchy: Level 1 intra-area routing and Level 2 inter-area backbone
  • TLV encoding makes the protocol easy to extend with new address families and metrics
  • A single Designated Intermediate System (DIS) per broadcast link, with no backup DIS
  • Fast SPF convergence with partial route calculation for changed prefixes

Real-World Use Cases

  • Large service provider backbones that need fast, stable convergence
  • Data center underlays that pair IS-IS with BGP for host routing
  • Networks mixing OSI and IP addressing during migration

Advantages & Strengths

  • Extremely stable and scalable in very large topologies
  • TLV design accepts new capabilities without rewriting the base protocol
  • Keeps working as a control plane even when IP addressing on a link is broken

Limitations & Vulnerabilities

  • Configuration and troubleshooting assume familiarity with CLNS and NSAP addresses
  • Far less common than OSPF in enterprises, so trained staff are harder to find