ProtoStackv0.1

Interactive Protocol Visualizer

Back to all protocols
5G NRAMQP
Wireless & RadioCore trackBeginnerOSI: Data Link LayerDefault Port: RJ45 / SFP+ OpticalStandard: IEEE 802.3 Standard

Ethernet (802.3)

— IEEE 802.3 Wired LAN

Ethernet is the predominant wired networking technology for local area networks (LANs) and metropolitan networks. From 10 Mbps over coaxial cables in the 1980s to 100 Gbps, 400 Gbps, and 800 Gbps fiber links in modern hyperscale cloud data centers, Ethernet frames transport virtually all IP traffic.

No prerequisites — a valid entry point.Content reviewed 2026-11-18

Interactive Session: How Ethernet (802.3) Works

Step through the packet exchange sequence between nodes.

Interactive Execution Sandbox

Interact with a live or clearly-labelled simulated instance of Ethernet (802.3).

Threat Model & Attack Simulation

How this protocol is attacked in practice, what defenders can see, and which control stops it.

Threat model & attack simulation

Simulated

Defensive education. Every step runs in this page; no traffic is generated or sent.

Attack library

MAC flooding (CAM table exhaustion)

Denial of service

A flood of frames with random source MAC addresses overflows the switch forwarding table, so unknown-unicast traffic is broadcast to every port.

Attackersimulated
Ethernet (802.3)target
Attack step 1 of 3
Overwhelm the table

The attacker sends thousands of frames with different source MACs. The switch keeps learning entries until its CAM table is full.

What a defender can see

A sudden spike in learned MACs and a falling CAM table watermark on the switch.

Impact if unmitigated

Confidentiality loss on the local segment and degraded performance for every host in the VLAN.

Defences that matter
  • Port security with a strict MAC limit
  • Storm control and broadcast suppression
  • Dynamic ARP Inspection plus VLAN segmentation

This is a conceptual model for defenders, not an exploit toolkit. It contains no payloads, tooling or instructions for attacking systems you do not own.

Protocol Specification & Architecture

Key characteristics, real-world deployment patterns, and trade-offs.

Core Technical Features

  • Standardized 1518-byte MTU frame structure (Preamble, MACs, EtherType, Payload, CRC)
  • VLAN Tagging (IEEE 802.1Q) for logical network isolation and trunking
  • Auto-negotiation for duplex mode (Full-Duplex) and speed (1G/10G/40G/100G/400G)
  • 48-bit physical MAC addressing

Real-World Use Cases

  • High-throughput cloud data center spine-leaf interconnects
  • Enterprise office desktop Gigabit links
  • Industrial Power-over-Ethernet (PoE) security cameras

Advantages & Strengths

  • Extreme reliability, immunity to RF noise, and low latency (sub-microsecond)
  • Massive bandwidth scaling up to 800 Gbps

Limitations & Vulnerabilities

  • Requires physical cable runs (Cat6/Cat6A or optical fiber transceiver pairs)